EH-BT

The EHBT is an electronically controlled, self contained hydraulic (glycol/water) based burst testing system designed for sample testing applications requiring the highest degree of precision.  This tester is capable of testing with fluid pressures up to 750 PSI.

The system allows user programmed pressures, ramp rates, and pass/fail limits adjustable digitally in 1.0 PSI increments and has the built-in capacity for cyclical testing if desired.

Standard Features:

Electronic Programming & Control allows user precise and consistent control of ramp-up pressure and speed for burst as well as parameters for cyclic testing if desired.

Allen Bradley MicroLogix Programmable Logic Controller (other controllers quoted upon request)

AB MicroLogix Controller with PanelView 300 User Interface simplifies parameter input and allows the following to be displayed and programmed digitally:

Displays Actual:

• Fill Time
• Burst Time
• Current PSI
• Cycle Number

Allows Programming of:

• Fill Time
• Max Burst PSI
• Max Burst Time
• PSI Drop (for Burst Event)
• PSI / Min (Ramp Rate)
• Number of Repeat Cycles (Cyclical Test Mode)

Multi-Level Passcode Protection limits parameter adjustment to qualified personnel only.

0-750 PSI Electronic Pressure Transducer allows burst testing of a wide range of products.

Pressure Control via Electronic Proportional Regulator allows user to digitally program pressure settings in passcode protected memory.  Digital control improves test accuracy and repeatability.

Heavy Duty Stainless Steel Enclosure with Lexan Viewing Window provides maximum personnel protection while allowing user to safely view the test part while pressurized.

Compact Design with Self-Contained Liquid System minimizes floor space. Filtered re-circulatory operation eliminates need to connect system to an external fluid/water supply.

Safety Interlock Switch and Captured Lock on Hinged Access Door prevents opening of enclosure while test part is under pressure.

Heavy-Duty Locking Casters allows relocation of the equipment with minimal mechanized assistance.

Two English Language Manuals provides detailed documentation and instruction of installation.

Part Test Chamber:  20.5” D x 30.5” W x 19.9” H (521mm x 775mm x 505mm)

Fluid Pressure Range:  0 – 750 PSI (0 – 51 Bar)

Fluid Type:  Glycol/H20 Mix

Fluid Capacity:  5 Gallons (18.9L)

Daylight Opening:  23.0” (584mm)

Machine Dimensions:  26.0” D x 45.0” W x 56.0" H (660mm x 1143mm x 1422mm)

Weight Empty:  325 lbs (148kg)

Weight Full:  375 lbs (170kg)

Color:  Natural Matte Stainless Steel

Electrical Requirements:  120VAC, 15A, 1-Phase, 60 Hz

Pneumatic Requirements:  80 PSI (5.4 Bar), 0.375” ID (10mm) Supply Line   System includes Filter/Regulator/Lubricator                                               

Warranty:  Free from materials and workmanship defects for one year from delivery.

Sequence of Operation:

1. Operator loads one part into part chamber.

2. Operator manually installs seals/plugs into openings in the test part.

3. Operator closes safety cover.

4. Safety cover locks.  

5. Operator actuates cycle activation switch.

6. Part is filled with glycol/water mixture, removing all air from the test part.

7. Test part is tested in accordance with programming (i.e.:  Burst or Cyclic Test).

8. Test part ruptures or otherwise satisfies test requirements based on user programmed limits.

9. Pressure is released from test part.

10. Safety cover unlocks and cover opens automatically.

11. Operator removes seals/plugs and connection lines from test part.

12. Operator drains residual fluid from test part and removes from test chamber.